BPM Diode Type
PDF Drucken

BPM Diode Type

BPM Diode Type

BPM Diode Type

BPM Diode Type

BPM Diode Type

BPM Diode Type

BPM Diode Type

BPM Diode Type


Technische Beschreibung


The beam position monitor is used for detecting the position of beams having very small cross sections (intense focussing), which for that reason cannot be measured with staggered pair monitors. They are typically the last monitors before experiments with focussed beams.
Large surface GaAsP photo diodes (Schottky type) in UHV-compatible design will be used as sensors. This is an array made of four photodiodes arranged on the left and on the right as well as above and below the beam.
The photon beam hits a thin high-transmission target foil. Fluorescence photons generate the photo-currents. From the differences between the currents in the four diodes the position of the beam can be established in-situ. The cooled monitor head is made of OFHC copper and can be moved via a power-driven linear manipulator orthogonally to the beam. The manipulator stroke allows the monitor to be completely removed out of the beam. The expected photon flows will be measured using pico-ammeters.

Technische Daten


Energy range: 1 keV … 20 keV

Diode type: GaAsP, Schottky type (Hamamatsu)

Active diode surface: 10.1 mm x 10.1 mm

Target foil: Al, Cr, Ti

Foil thickness: 0.001 mm

Transmission: approx. 95% at 5 keV and 0.001 mm Al

Basic flange: CF 150

Monitor head: OFHC copper

Manipulator stroke: 50 mm vertical

Drive: stepping motor, limit and reference switches

Cooling: OFHC copper pipe, Ø 6x1

Temperature measurement: TC, K-type

Photo-current measurement: 4 pico-ammeters (Keithley 6485 or equivalent)

UHV compatibility: yes



FileBeschreibung
Download this file (BPM_Diode-Type.pdf)BPM_Diode-Type.pdf